Pet automatic one out four blowing machine

Mechanical characteristics

1. Simple operation and convenient maintenance. We can control and view the operation status of the whole machine through the man-machine interface. If there is a fault, the machine will automatically emit a whistle through the alarm device, and the man-machine interface can find the fault location accurately and conveniently, so that the maintenance personnel can repair it in time.

2. High energy consumption and low waste, we have a stable infrared heating system blowing and a highly accurate blow mold closing system to ensure quality.

3, the mechanical structure design is reasonable and the floor space is smaller

Mechanical model: TH-4000

Chinese name: pet automatic one out four blowing machine

Cavity number: 4

Theoretical yield: 4000p/h

Blowable capacity: 10ml-2000ml

Maximum height of the bottle: 320mm

Maximum diameter of the bottle: 110mm

Blowable tooth size: 18-45

Total power consumption: 54KW

Mechanical configuration

Man-machine interface: Taiwan Delta

Controller: Taiwan Delta

Electromagnetic valve: Taiwan Yadeke, South Korea PMC, Germany Festo, etc.

Steam cylinder: Taiwan Yadeke, Japan SMC, Germany Festo, etc.

Sensor: Korea Autonics

Relay: Japan Omron, France Schneider

Note: All our accessories are made of international high-tech products.

技术参数   General InformationTH-5000-4 cavity
  合模力 Clamping Force80 T
  开模行程 Clamping Stoke350mm
  最大拉伸 Max.Stretching Stroke420mm
  瓶底行程 Bottom Moving Stroke0-50mm
  腔数 Number of Cavities4 Cavity
  产量 Theoretical Output1.6-0L:8000-2000-3000 BPH
  最大模厚 Max.Mould Thickness400mm
  模板尺寸 Mould plate size630x340mm
  功率 Total Power(Full Loaded)10-25KW
  高压空压机 Min air compressor7.2m3/min 3.0Mpa
  低压空压机 Min air compressor2.0m3/min 1.0Mpa
Electrical System
  电压 Voltage Standard380v/3PH/50Hz or special order
  加热区 Number of Heating Zone4 Sections
  功率 Total Power(Full Loaded)88KW
Container 制品容积
  最大制品容积 Container Volume1.0-6.0L
  瓶口尺寸 Neck Diameter Range38-60mm
  最大直径 Container Diameter300mm
  容器高度 Container Height400mm
Air system
  低压系统 Low Air compessor8-10Bar
  高压系统 High Air compessor30-40Bar
Net dimension & Weight(LxWxH)净尺寸和净重
  主机 Blow Molding Machine855x200x200cm
  上料机尺寸 Preform Autoloader  210x120x220cm
  净重 Net Weight8.8T